Cement Test

The following tests are conduct in lab for Cement:-

1) Fineness test: The property of cement that indicates particle size of cement and specific surface area is called fineness of cement. Rate of hydration greatly depend on fineness of cement and a for a rapid development of strength, high fineness is required.

Cement test 

2) Soundness Test: It is essential for cement paste that once it has sets, does not undergo a large change in volume. The ability of cement to retains its volume after it get harder is known as soundness of cement. This test conduct to identify the excess amount of lime in cement.

Cement test 

3) Consistency Test: The consistency at which cement paste will permit penetration on vicat plunger of 10 mm diameter and 50 mm length to a depth of 33-35 mm from top of the mould is defined as the standard consistency of cement. Generally, standard consistency for OPC is 26-33%.

Cement test 

4) Setting Time Test: In broad sense setting refers to change of cement paste from a fluid state to a rigid state. Generally, Initial setting time and final setting time is required to test at lab.

Initial setting time is the state of cement mortar or concrete when it starts to become stiffen.

Final setting time is the state when cement mortar or concrete becomes fully unworkable.  

 For OPC initial setting time is 30 minutes and final setting time is 600 minutes.

5) Chemical composition Test:

6) Strength Test ( Compressive and..   Tensile): Cement has two types of strength: compressive strength and tensile strength . 

Two know the compressive strength  cement mortar cube test performed at lab.

And for tensile strength Briqutte test and split tensile test performed.

Field test of Cement